PCH Associates logo

PCH Associates, LLC
Albany, NY | (518) 577-7707 | peterhughes01@aol.com
NY Home Inspector License #16000008390 | NY Termite and Pest Certification ID #C4862397

classic home

Mold - Frequently Asked Questions

[Source: Centers for Disease Control and Prevention]

We check bathrooms carefully for evidence of moldMold and Your Home

Mold is found both indoors and outdoors. Mold can enter your home through open doorways, windows, vents, and heating and air conditioning systems. Mold in the air outside can also attach itself to clothing, shoes, bags, and pets can and be carried indoors.

Mold will grow in places with a lot of moisture, such as around leaks in roofs, windows, or pipes, or where there has been flooding. Mold grows well on paper products, cardboard, ceiling tiles, and wood products. Mold can also grow in dust, paints, wallpaper, insulation, drywall, carpet, fabric, and upholstery.

You Can Control Mold

Inside your home you can control mold growth by:

If mold is growing in your home, you need to clean up the mold and fix the moisture problem. Mold growth can be removed from hard surfaces with commercial products, soap and water, or a bleach solution of no more than 1 cup of bleach in 1 gallon of water.

Mold growth, which often looks like spots, can be many different colors, and can smell musty. If you can see or smell mold, a health risk may be present. You do not need to know the type of mold growing in your home, and CDC does not recommend or perform routine sampling for molds. No matter what type of mold is present, you should remove it. Since the effect of mold on people can vary greatly, either because of the amount or type of mold, you can not rely on sampling and culturing to know your health risk. Also, good sampling for mold can be expensive, and standards for judging what is and what is not an acceptable quantity of mold have not been set. The best practice is to remove the mold and work to prevent future growth.

If you choose to use bleach to clean up mold:

MOLD PREVENTION TIPS

  • Keep humidity levels as low as you can—no higher than 50%--all day long. An air conditioner or dehumidifier will help you keep the level low. Bear in mind that humidity levels change over the course of a day with changes in the moisture in the air and the air temperature, so you will need to check the humidity levels more than once a day.
  • Be sure your home has enough ventilation. Use exhaust fans which vent outside your home in the kitchen and bathroom. Make sure your clothes dryer vents outside your home.
  • Fix any leaks in your home’s roof, walls, or plumbing so mold does not have moisture to grow.
  • Clean up and dry out your home thoroughly and quickly (within 24–48 hours) after flooding.
  • Add mold inhibitors to paints before painting.
  • Clean bathrooms with mold-killing products.
  • Remove or replace carpets and upholstery that have been soaked and cannot be dried promptly. Consider not using carpet in rooms or areas like bathrooms or basements that may have a lot of moisture.
  • To learn more about preventing mold in your home, see the Environmental Protection Agency's publication A Brief Guide to Mold, Moisture, and Your Home.

 



NY Capital Region Home Inspector | Albany NY Home Inspector | NY Capital Region Home Inspections | Albany NY Property Inspector | NY Capital Region Property Inspections | Request an Inspection | Contact Us